Ad
Saturday, May 17, 2025
10.4 C
London

U.K. Edition

Farrans Construction Ltd fined 15k after fall from low guard-rail height

- Advertisement -
Farrens (Construction) Ltd
Rosie Maternity Hospital where the incident happened.

Belfast-based Farrans Construction Ltd has been prosecuted by the Health & Safety Executive (HSE) after a engineer was severely injured when he fell down a lift shaft at a construction site in Cambridge.

Farrans Construction Ltd was prosecuted yesterday and fined £10,000 and £5,225 costs after an investigation by the HSE found that guard-rails placed across the entrance to the lift shaft did not meet the statutory height requirement.

Cambridge magistrates heard that Mr Moore, an experienced lift engineer, was working on the top floor of a new three-storey annex under construction, and was preparing the shaft ahead of a lift installation. He was about to bring up further equipment from a floor below when he fell into the lift shaft and fell nine metres. He was discovered at the bottom of the shaft by a subcontractor working nearby.

Terry Moore, 51, from Wisbech, suffered fractures to his left foot, shoulder, lower spine and pelvis, and was unable to work for several months as a result of the incident at Rosie Maternity Hospital – part of Addenbrooke’s – on 29 March 2012.

The HSE’s investigation found that that the guard-rails placed across the entrance to the upper floor shaft were 908mm high, which is 42mm short of the 950mm required by regulations.

The court was told that although it could not be proven that the height discrepancy was a factor in the fall, it was a serious safety failing.

Farrans Construction Ltd, of Dunmurry, Belfast, was fined £10,000 and ordered to pay £5,225 costs after pleading guilty to a single breach of the Work at Height Regulations 2005.

HSE inspector John Berezansky said:

“Farrans Construction Ltd failed to implement a well-known industry standard regarding the height of the barriers across the lift shaft entrance.

“This standard has been in place for a considerable number of years, and it clearly states that the top guard rail must be at least 950mm above the edge from which any person is liable to fall. That is an absolute requirement and the onus is on employers to ensure this standard is met at all times.

“Construction work is a high-risk activity where falls account for a large proportion of all deaths and serious injuries. The end result here is that Mr Moore, an experienced engineer, sustained horrific injuries and could easily have been killed.”

- Advertisement -

Popular this week >

CISRS Launches Overhaul of Scaffolding Training in Landmark Reform Drive

In a move set to reshape the future of...

CISRS Hits Back at Breakaway Training Alliance Criticism

The Construction Industry Scaffolders Record Scheme (CISRS) has issued...

New Breakaway Scaffolding Training Body Launched Amid Industry Uncertainty

A new trade body has been launched to support...

Scaffolding Firm Supports Restoration of Iconic Jenners Building

Specialist scaffolding works are playing a crucial role in...

New U.S. Standard for Scaffold Boards Approved by ANSI

A new standard governing the testing and rating of...
- Advertisements -

Related Articles >

Scaffolding Company Hit with £30,000 Fine Over Safety Lapses

A Merseyside scaffolding company has been fined £30,800 after an investigation found workers had been using an unsafe scaffold at a construction site in Merseyside. A.I.M Access Solutions Ltd, based in Kirkby, was prosecuted...

Latest Topics

New Regional Manager to Lead Brogan Group’s Northern Growth

Brogan Group has appointed Geoff Beentjes as Regional Manager...

Sean Pike Celebrates 26 Years with Layher UK

This month has marked an impressive milestone for one...

Bechtel Secures Role in Landmark Saudi Airport Project

Global engineering giant Bechtel has been appointed as the...

New U.S. Standard for Scaffold Boards Approved by ANSI

A new standard governing the testing and rating of...
- Advertisement -

Popular Categories