Ad
Friday, September 5, 2025
19.1 C
London

The Voice of Scaffolding Since 2008  U.K. Edition

00Days
00Hours
00Mins
00Secs

Company fined £270K after MEWP fatality

- Advertisement -

A Lincolnshire-based company that specialises in lifting and handling equipment has been fined after an employee died after falling with a work platform onto the M25 motorway.

Reading Crown Court heard that Rick Jeager-Fozard, an employee of Kimberly Access Limited, was carrying out a routine pre-delivery inspection on a mobile elevating work platform (MEWP) in June 2013.

The MEWP extended to an unsafe angle, resulting in the MEWP falling onto the M25 motorway. Mr Jeager-Fozard was working in the platform of the MEWP, falling with the device.

An investigation by the HSE found that the device had become unsafe because a miscalibration of its secondary boom angle sensor, which started to extend even though the boom had not been raised to the necessary angle. It was found that the MEWPs secondary boom had raised to an angle around 6-degrees lower that required, the boom then extended beyond its safe working limit and tipped over.

The miscalibration occurred through incorrect data being manually manipulated and uploaded onto the machine via a laptop using password protected WebGPI software. The carrying out of warranty repairs on the machine during this period, including granting access to the WebGPI software, fell within the conduct of Genie UK Ltd’s undertaking.

Genie UK Limited of The Maltings, Wharf Road, Grantham, Lincolnshire pleaded guilty to breaching Section the Health and Safety at Work Act 1974. The company was fined £270,000 and ordered to pay costs of £165,175.

HSE inspector Stephen Faulkner said: “This was a tragic and harrowing incident. Modern high reach MEWPs rely on accurate data to ensure they extend and operate safely, and steps should be taken to ensure the process of calibrating sensors is correctly followed.

“Companies should be aware that HSE will not hesitate to take appropriate enforcement action against those that fall below the required standards.”

- Advertisement -
Scaffmag Newsdesk
Scaffmag Newsdeskhttps://www.scaffmag.com
The staff at ScaffMag.com the leading scaffolding site for a digital generation.

Popular Categories

Most Read

Major shake-up in scaffolding training governance announced

The National Access and Scaffolding Confederation (NASC) has unveiled...

Game changing UK-First in Scaffolding Innovation under the Forth Road Bridge 

Layher pioneers its advanced cantilever technique with Hardrock Scaffolding...

Shaun Ryder tipped as VIP guest at ScaffEx25 awards

Musician Shaun Ryder is rumoured to be among the...

Layher UK set to unveil show-stopping ScaffEx25 stand in exclusive preview 

Scaffmag has been given exclusive behind-the-scenes access to Layher...

Leaked Drone Footage Shows Giant ScaffEx Screen Over Manchester

Leaked drone footage has revealed a giant video screen...

Related Articles

Scaffolders Could Down Tools in Heatwave Under New HSE Proposals

Scaffolders could be given the right to stop work during extreme heat under plans being developed by the Health and Safety Executive (HSE). The proposals, aimed at protecting manual workers from heat stress, would...
- Advertisements -

Latest Topics

Leach’s partners with DeWalt to launch tools tailored for scaffolders

Leach’s has announced a new partnership with power tool...

Major shake-up in scaffolding training governance announced

The National Access and Scaffolding Confederation (NASC) has unveiled...

Layher UK set to unveil show-stopping ScaffEx25 stand in exclusive preview 

Scaffmag has been given exclusive behind-the-scenes access to Layher...
- Advertisement -