Working at height breaches increase by 84%

ADVERTISEMENT

The Building Safety Group (BSG) has reported an 84% increase in the number of ‘Working at Height’ breaches occurring on construction sites during the first quarter of 2021.

BSG’s latest figures were obtained following 4300 independent site inspections that took place between January and March this year.

BGS’s report is a cause for concern as ‘Working at Height’ remains the biggest danger for construction workers. Statistics released by the Health and Safety Executive (HSE) in 2020 show that almost half of all construction accidents (47%) were from falls from height.

There were 40 fatal injuries in 2019/20, slightly up on the 5-year average of 37 per year. 29 of these fatalities were due to falls from height. Over 60% of deaths during working at height involve falls from ladders, scaffolds, working platforms, roof edges and through fragile roofs.

The Work at Height Regulations 2005 require employers and those in control of any work at height activity to ensure that the work is properly planned, well supervised and carried out by competent people.

In general terms, being competent to work at height means having the right skills, knowledge, training and experience. The precise definition of competence for a specific job depends on the nature of the work and the equipment being used.

“Working at Height is clearly the most dangerous activity carried out in the construction sector,” commented Andy Harper, Technical Support Manager at BSG.

“We can all do more to ensure that work is properly planned, supervised and conducted by qualified workers who have the required skills for the job in hand. Having the correct control measures in place and assessing the risk is also essential for avoiding accidents.

In addition, companies should try to complete as much work as possible from the ground, ensure safe access and egress and importantly, make certain that any equipment used is suitable and designed for that purpose, installed and used by a competent person and inspected as required by the Working at Height Regulations 2005 and relevant guidance.”

Most popular ↑

HSE warns employers to protect workers as extreme heat alert begins

Scaffolding contractors across much of England are being urged...

AT-PAC expands European marketing support with Petite Agency

AT-PAC has expanded its marketing partnership with Petite Agency...

Fatal New Malden fall followed missed scaffold inspections

Lima Construction Limited has been fined £50,000 after a...

New NASC TG4 guidance targets anchor tie safety on site

NASC has launched a new TG4 User Guide and...

Freight surge raises warning over scaffold material costs

A sharp rise in global container shipping rates is...

Latest news

ADVERTISEMENT
More from
Latest articles

NASC AGM confirms new president and 10-region structure

Sarah Klieve has taken over as NASC president as the trade body introduces a...

Fatal New Malden fall followed missed scaffold inspections

Lima Construction Limited has been fined £50,000 after a worker fell to his death...

Freight surge raises warning over scaffold material costs

A sharp rise in global container shipping rates is beginning to feed through to...

Des Moore: “The next five years are critical” for scaffolding

As Des Moore approaches his 70th birthday, he is not interested in nostalgia. After...

AT-PAC expands European marketing support with Petite Agency

AT-PAC has expanded its marketing partnership with Petite Agency to cover parts of its...

HSE warns employers to protect workers as extreme heat alert begins

Scaffolding contractors across much of England are being urged to act on heat risk...

New NASC TG4 guidance targets anchor tie safety on site

NASC has launched a new TG4 User Guide and poster to support the safe...

Amber heat alert puts scaffolding site welfare in focus

Scaffolding firms are being urged to review hot-weather controls as an amber heat-health alert...