Ad
Sunday, August 17, 2025
19.1 C
London

The Voice of Scaffolding Since 2008  |  U.K. Edition

Farrans Construction Ltd fined 15k after fall from low guard-rail height

- Advertisement -
Farrens (Construction) Ltd
Rosie Maternity Hospital where the incident happened.

Belfast-based Farrans Construction Ltd has been prosecuted by the Health & Safety Executive (HSE) after a engineer was severely injured when he fell down a lift shaft at a construction site in Cambridge.

Farrans Construction Ltd was prosecuted yesterday and fined £10,000 and £5,225 costs after an investigation by the HSE found that guard-rails placed across the entrance to the lift shaft did not meet the statutory height requirement.

Cambridge magistrates heard that Mr Moore, an experienced lift engineer, was working on the top floor of a new three-storey annex under construction, and was preparing the shaft ahead of a lift installation. He was about to bring up further equipment from a floor below when he fell into the lift shaft and fell nine metres. He was discovered at the bottom of the shaft by a subcontractor working nearby.

Terry Moore, 51, from Wisbech, suffered fractures to his left foot, shoulder, lower spine and pelvis, and was unable to work for several months as a result of the incident at Rosie Maternity Hospital – part of Addenbrooke’s – on 29 March 2012.

The HSE’s investigation found that that the guard-rails placed across the entrance to the upper floor shaft were 908mm high, which is 42mm short of the 950mm required by regulations.

The court was told that although it could not be proven that the height discrepancy was a factor in the fall, it was a serious safety failing.

Farrans Construction Ltd, of Dunmurry, Belfast, was fined £10,000 and ordered to pay £5,225 costs after pleading guilty to a single breach of the Work at Height Regulations 2005.

HSE inspector John Berezansky said:

“Farrans Construction Ltd failed to implement a well-known industry standard regarding the height of the barriers across the lift shaft entrance.

“This standard has been in place for a considerable number of years, and it clearly states that the top guard rail must be at least 950mm above the edge from which any person is liable to fall. That is an absolute requirement and the onus is on employers to ensure this standard is met at all times.

“Construction work is a high-risk activity where falls account for a large proportion of all deaths and serious injuries. The end result here is that Mr Moore, an experienced engineer, sustained horrific injuries and could easily have been killed.”

- Advertisement -

Popular Categories

Most Read >

Scaffolders Could Down Tools in Heatwave Under New HSE Proposals

Scaffolders could be given the right to stop work...

NASC and SAIA Join Forces to Elevate Global Scaffold Standards

The National Access & Scaffolding Confederation (NASC) and the...

Bristol Scaffolders Raise £20k with Mountain-top Tower Tribute

A group of scaffolders have carried and erected an...

Pilosio Partners with Sky Climber to Bring FlyDeck System to North America

Italian scaffolding manufacturer Pilosio has entered the North American...

Scaffolding Association Joins Build UK to Boost Industry Voice

The Scaffolding Association has formally joined Build UK as...
- Advertisements -

Related Articles >

Scaffolders Could Down Tools in Heatwave Under New HSE Proposals

Scaffolders could be given the right to stop work during extreme heat under plans being developed by the Health and Safety Executive (HSE). The proposals, aimed at protecting manual workers from heat stress, would...

Latest Topics

SARNZ chief executive to step down after four years

The head of Scaffolding, Access & Rigging NZ Inc...

ITP invests in R&D hub to advance scaffolding protection products

A Yorkshire-based manufacturer of construction textiles is creating a...

Scaffolders Could Down Tools in Heatwave Under New HSE Proposals

Scaffolders could be given the right to stop work...

Layher: Leading the way in product and design innovation

As Layher is shortlisted for the NASC Scaffolding Excellence...
- Advertisement -